| TITLE | STANDARDS | MATERIAL / COMPOSITION | CODE | DIMENSION IN MM |
| Brass | CR Brass Strips (IS 410. Grade 3) | 402 | 50 x 25 x 2 thk | |
| Aluminium Alloy | As per IS 1154 | 403 | 50 x 25 x 2 thk | |
| Magnesium Alloy | As per IS 1154 | 404 | 50 x 25 x 2 thk | |
| Zinc Base Alloy | As per IS 1154 | 405 | 50 x 25 x 2 thk | |
| Turbine Oil Rust | ASTM D 665 | Steel Specimen | 411 | ½ inch dia, US thread, 81L |
| IP 135 | (BS970, Part I/SAE 1018) | |||
| IS 1448 P:96 | PTFE Holder | 412 | IS / ASTM | |
| PTFE Beaker cover | 413 | 95.3 dia x 2.4 thk | ||
| SS stirrer | 414 | 25 x 6 x 0.6 thk | ||
| Method for corrosion protection | IS 10493 | |||
| Test for TCP | MS (IS 513) | 421 | 100 x 150 x 3 hole | |
| Test for protection against | MS (IS 513) | 422 | 50 x 25 x 2 thk | |
| Corrosion at high temperature & | Brass (IS 410) | 423 | 50 x 25 x 2 thk | |
| High humidity (cabinet test) | Brass (IS 410) | 424 | 50 x 25 x 2 thk | |
| Test for freedom from | Mg Alloy | 425 | 50 x 25 x 2 thk | |
| Corrosive effect on | Zinc Base Alloy (IS 713) | 426 | 50 x 25 x 2 thk | |
| Metal coupies | ||||
| Copper strip corrosivity | Annealed Electrolytic Cu (>99.9%) | 427 | 75 x 13 x 2 | |
| Test for Corrosion effect on lead | Lead Strip (IS 405) (Part 1) | 428 | 75 x 50 x 1.6 | |
| Test for Corrosion resistanceOf strippable coating | Cold Finished Strip (IS 513) | 429 | 75 x 50 x 4 dia hole | |
| Sulphur Dioxide Test (IP Test) | MS (IS 513) | 430 | 150 x 50 x 0.9 thk | |
| Salt Spray Test | ASTM B 117 | MS Panels | 441 100 x 50 x 2 thk | |
| Cyclic wet/dry prohesion | ASTM G 85 A5 | MS Panels | 442 100 x 50 x 2 thk | |
| Rust protection by metal | ASTM D 1748 | C.R.Ship A 109 or (QQ-S-698 Gr 1009) | 446 | 102 x 51 x 3.2 mm |
| Preservatives in the | (two holes 3 mm each) | |||
| Humidity cabinet | IP 366 | |||
| Dummy Panel SS 304 | 446/A | 102 x 51 x 3.2 mm | ||
| (two holes 3 mm each) | ||||
| Dummy Panel | 446/B | 102 x 51 x 3.2 mm | ||
| Metha acrylic | (two holes 3 mm each) | |||
| Engine Coolant | JIS K 2234 | Aluminium casting Strip, JIS H 5202 | 501 | 50 x 25 x 3 thk |
| Antifreeze Coolant | IS 5759 | Cast Iron Strip, JIS G 5501 | 502 | 50 x 25 x 3 thk |
| ASTM D 1384 | Steel Strip, JIS G 3141 | 503 | 50 x 25 x 1.6 thk | |
| Brass Strip, JIS Z 3100 | 504 | 50 x 25 x 1.6 thk | ||
| Solder Strip, JIS Z 3282 | 505 | 50 x 25 x 3 thk | ||
| Copper Strip, JIS 3100 | 506 | 50 x 25 x 1.6 thk | ||
| Screw covered with Resin | 507 | M5 x 0.8 x 60 | ||
| Synthetic Spacer A, PTFE | 508 | d12 x d6.5 x 1.5 | ||
| Steel spacer B | 509 | d12 x d6.5 x 4.5 | ||
| STEEL spacer C | 510 | d12 x d6.5 x 4.5 | ||
| Synthetic Spacer D, PTFE | 511 | d12 x d6.5 x 4.5 | ||
| Supporting Brass Plate | 512 | 50 x 25 x 1.6 thk | ||
| Brass Nut | 513 | M5 x 0.8-6H, Hexagon | ||
| Aluminium Corrosion at | ||||
| Heat transfer surface | ASTM D 4340 | Cast Aluminium JIS H 5202 | 518 | 65 dia x 13 thk |
| Corrosivity of IC | JIS K 2234 | |||
| Engine Coolant | IS 7029 | |||
| Descalling agent action | IS 7029 | Mild steel strip | 521 | 50 x 25 x 1.2 |
| Copper Strip | 522 | 50 x 25 x 1.2 | ||
| Brass Strip | 523 | 50 x 25 x 1.2 | ||
| Cast Iron Strip | 524 | 50 x 25 x 1.2 | ||
| Aluminum Strip | 525 | 50 x 25 x 1.2 | ||
| Solder : 70% Lead, 30% Tin | 526 | 50 x 25 x 1.2 | ||
| Corrosion Inhibition | IS 7029 | Aluminium Strip | 527 | 37.5 x 25 x 1.2 |
| Copper Strip | 528 | 37.5 x 25 x 1.2 | ||
| Mild Steel Strip | 529 | 37.5 x 25 x 1.2 | ||
| Lead coated Mild Steel | 530 | 37.5 x 25 x 1.2 | ||
| Solder coated Mild Steel | 531 | 37.5 x 25 x 1.2 | ||
| Turbine Oil Oxidation | ASTM D 934 | Steel Wire | 701 | 1.6 dia |
| DIN 51587 | Copper Wire | 702 | 1.6 dia | |
| IS 1448 P: 106 | Wire coiling Mandrel, Brass & Steel | 703 | as per ASTM D 943 | |
| SS Thermometer Bracket | 704 | 22 Gauge |