TITLE STANDARDS MATERIAL / COMPOSITION CODE DIMENSIONS IN MM
Brake Fluid ISO 4925 Tinned Iron Strips 101 80 x 13 x 5 thk, hole 4.0
  SAE J 1703 Steel Strips 102 80 x 13 x 5 thk, hole 4.0
  MVSS - 116 Aluminium Alloy Strip 103 80 x 13 x 5 thk, hole 4.0
  DOT 3, DOT 4, Cast Iron Strip 104 80 x 13 x 5 thk, hole 4.0
  DOT 5 Brass Strip 105 80 x 13 x 5 thk, hole 4.0
  IS 8654 Copper Strip 106 80 x 13 x 5 thk, hole 4.0
    Zinc Strip 107 80 x 13 x 5 thk, hole 4.0
    M.S. Nut & Screw 108 80 x 13 x 5 thk, hole 4.0
Brake Fluid resistanceTo oxidation ISO 4925 Aluminium Alloy Strip (IS 737) 113 80 x 13 x 5 thk, hole 4.0
  SAE J 1703 Cast Iron Strip (IS 3355) 114 80 x 13 x 5 thk, hole 4.0
  MVSS 116 Tinned Iron Strips (99.9% Tin) 115 12 x 12 x 0.05 thk,(Avg.)
  DOT 3, DOT 4 M.S. Nut & Screw 116 12 Long, Fillister head
  DOT5,IS 8654      
Copper corrosion For lubes and IS 1448,P:15 Copper Strip 201 75 x 12.5 x 2.5 thk
Liquid fuels Copper corrosion for LPG ASTM D 130   202 75 x 12 x 2 thk
  ASTM D 130   203 75 x 12 x 2 thk
  ASTM D 1838 Copper Strip 204 75 x 12 x 2 thk with hole 3.2
Effect of Grease on Copper ASTM D 1261 Copper Strip 205 44.5 x 8 x 1.6
Corrosive Sulfur inInsulating Oil DIN 51 353 Silver 99.99 220 400 x 20 x 0.5
Cast Iron Corrosion IS 1115 Grey Cast Iron plate 251 100 x 100 x 6 thk
  IP 125      
Steel Milling Test IS 1115 Steel Milling prepared byDry milling 252 6 long x 1.5-3 width
Iron Chip Corrosion ASTM D 4627 Grey Cast Iron Chips 261 Chips sieved thru 5-18 mesh
    Brinell Hardness 179-217    
    Dry Milling from high speed drill    
Studies of atmosphericCorrosion on Metals IS 5555
Steel outdoor
 271 100 x 150 x 1.25
   
indoor
 272 150 x 50 x 1.25
    Zinc outdoor 273 100 x 150 x 1.25
   
indoor
 274 150 x 50 x 1.25
    Aluminium outdoor 275 100 x 150 x 1.25
   
indoor
 276 150 x 50 x 1.25
    Stainless Steel outdoor 277 100 x 150 x 1.25
   
indoor
 278 150 x 50 x 1.25
    tin outdoor 279 100 x 150 x 1.25
  > notches made foridentification if required
indoor
 280 150 x 50 x 1.25
Studies of undergroundCorrosion on metals IS 1808 Cast iron pipes-horizontal C.Spun 281 65 dia, 250 long
    Galvanized Steel Pipe 282 65 dia, 250 long
    MS pipe 283 65 dia, 250 long
    AL pipe 284 65 dia, 250 long
    MS plates 285 200 x 300 x 3 thk
    Cu plates 286 200 x 300 x 3 thk
    Aluminium Cable 287 300 long
    Lead Cable 288 300 long
Wire Rope Lubricant IS 9182      
Test for water Repellency        
Mild Steel Plate (IS 513)   301 80 x 40 x 1.3
Property        
Test for Adhesion and   Mild Steel Panel (IS 513) 302 76 x 100 x 1.3 thickness
Test for Low Temperature   Tin plate (IS 597) 303 75 x 25, hole of 6 dia
Flexibility        
Corrosivity effect of Temperrature IS 1154      
Corr. Prevent.On        
Mild steel   CR Steel Strips (IS 513, Type P) 401 50 x 25 x 2 thk