| BIS NO | YEAR |
DESCRIPTION
|
|
| Part 40 | Water Content by Dean & Stalk | ||
| Part 41 | Sediments by Centrifuge | ||
| Part 43 | Bromine number | ||
| Part 52 | Drop Point | ||
| Part 53 | Alkalinity & Acidity by Colour Indication & Titration | ||
| Part 55 | Saponification Number | ||
| Part 56 | Viscosity Index | ||
| Part 58 | Molybdom Disulphide Content | ||
| Part 59 | Mineral Oil Corporation | ||
| Part 60 | Penetration, Grease | ||
| Part 61 | Evaporation Loss, 2 hrs drying | ||
| Part 62 | Heat Stability of Calcium Base Grease | ||
| Part 67 | Foaming Characteristics | ||
| Part 68 | Evaporation Loss | ||
| Part 69 | Fire Point, Flash Point (COS) | ||
| Part 85 | Oxidation test for Lubrication Oil | ||
| Part 86 | Base Number Total | ||
| Part 90 | Water Washout | ||
| Part 91 | Emulsification Characteristics | ||
| Part 93 | Needle Penetration of Waxes | ||
| Part 95 | Steam Emulsion Number | ||
| Part 96 | Rust Test | ||
| Part 102 | Air Release Valve | ||
| Part 103 | Barium Zinc, Calcium, Phosphorous by Emission | ||
| Part 106 | Oxidation Characteristics of Inhibited Steam Turbine Oils | ||
| Part 108 | Cold Cranking Simulator Viscosity | ||
| Part 116 | Penetration ½ & ¼ Scale Cone | ||
| Part 120 | Zinc in Lube Oils | ||
| Part 123 | Oxidation Stability of inhibited Mineral Turbine Oils | ||
| Part 125 | Deleterious Particles | ||
| 1589 | 1994 | Oil; Cylinder (superseding IS:311-1951 & IS:316-1951) | |
| 1628 | 1986 | Axle Oil 1674 | |
| 1960 | Temporary corrosion preventive fluid, soft film, solvent deposited | ||
| 2297 | 1987 | Lubricants for gears, compounded | |
| 2660 | 1964 | Oil; Cylinder Grade 4 | |
| 3065 | 1985 | Cutting oil, neat | |
| 3492 | 1965 | Karanja Oil | |
| 4578 | 1989 | Lubricating Oils for refrigeration Machines | |
| 4730 | 1994 | Method for determination of density of liquids | |
| 5759 | 1994 | Antifreeze Coolant | |
| 6014 | 1978 | Emulsifiable larvicidal oil, pyretheum based | |
| 6048 | 1970 | Specification for Temporary corrosion preventive grease, soft film, hot dipping type | |
| 6049 | 1971 | Code of practice for application of temporary corrosion preventives | |
| 6050 | 1971 | Temporary corrosion preventive, strippable, hot dipping type | |
| 6104 | 1971 | Method of test for interfacial tension of oil against water by ring method | |
| 7029 | 1973 | Code of practice for inhibitor of I.C. Engine Coolant Water | |
| 7514 | 1994 | Grease, low temperature |